Tribology Laboratory

people
research
facilities
publications


Courses

syllabuses
office hours
homework
Bulletin Board


Contact

Office
e-mail
mailing address
driving directions


Glossary

Links


Return to Links

Tribologists Around the World

Australia

Mr. Ashok Rajulu
Research Scholar
Dept of Mineral Resources, University of South Australia
Mawson Lakes   SA  5095, Australia
Ph: + 61 8 8302 3706, + 61 8 8302 3203; Fax: + 61 8 8302 3379
9709161m@levels.unisa.edu.au

Wear and Corrosion of artificial Hip Implants

Dr Will Scott
Principal Consultant
Fuchs Tribology Consulting and Education Services
Adjunct Professor (Queensland University of Technology)
Ph: +61-(0)7- 38761834; Fax: +61-(0)7- 38761835
will.scott@fuchslubritech.com.au
http://www.fuchslubritech.com.au

Professor Gwidon W. Stachowiak  MSc PhD PhD DIC
Department of Mechanical and Materials Engineering
University of Western Australia
Ph: (61 8) 9380 3119;  Fax (61 8) 9380 1024
gws@mech.uwa.edu.au
http://www.mech.uwa.edu.au/mech/staff/Stachowiak.html

Tribology,  Machine condition monitoring,  Bio-medical engineering

Mr Aiqi Yang, BSc, MSc, and PhD candidate
Department of Mechanical Engineering
The University of Newcastle
Callaghan, NSW 2308, Australia
Ph: +61 2 4921 7204, Fax: +61 2 4921 6021
meay@cc.newcastle.edu.au

Wear mechanisms, quantitative image analysis of wear particle morphologies and surface textures.



Algeria

Dr Mohamed LABAïZ
Surface and Tribology Group
Department of metallurgy of Materials Engineering
University of Annaba, P.O. Box 12, 23000, Algeria
Phone/Fax : 213 8 87 67 46, 213 8 87 17 12,  213 8 87 56 08
M.labaiz@caramail.com
Http://membres.tripod.fr/tribologie

Tribology at high temperature, tribology of  metallic oxides, metal forming and wear, tribology of hard coatings, mechanical properties of coatings (adherence)

 



Bangladesh

Dr. A. S. M. A. Haseeb
Dept. of Materials and Metallurgical Eng.
Bangladesh University of Engineering and Technology (BUET)
Dhaka 1000, Bangladesh
fax:  +880-2-863 026,  +880-2-863 046
haseeb@mme.buet.edu

Tribological properties of metallic alloys in relation to microstructure and heat treatment conditions, Polymer and semi-metallics based friction materials



Belarus

Alexander MINEVICH, PhD, MSTLE
SKF Group
Pushkin Pr., 39, Minsk 220092
Belarus
Ph: +375-17-257-04-25; Fax: +375-17-257-22-74
Alexander.Minevich@skf.com

Dr. Nikolai K.Myshkin
Head of Tribology Department, Metal-Polymer Research Institute of Belarus
National Academy of Sciences,
Kirov street 32a, Gomel, 246050,  Belarus
Ph: +375(232)526273; Fax: 375(232)525362
nkmyshkin@mail.ru

 



Belgium

Professor Jean-Pierre CELIS
Katholieke Universiteit Leuven
Dept. MTMde Croylaan 2
B-3001  Leuven (Belgium)
Fax:. +32.16.32.19.91
Jean-Pierre.Celis@mtm.kuleuven.ac.be
http://www.mtm.kuleuven.ac.be/Research/SURF

Friction and wear of hard coatings, surface engineering,  fretting, corrosion wear, tribochemistry, electrochemistry, electroplating, composite coatings

Dr. Dirk Drees
Currently the Director of Testing and Research of Falex Tribology NV in Europe.
Falex Tribology NV, Technologielaan 11-0001
B-3001 Leuven, Belgium
+32-(0)16-407965
dirk.drees@falexint.com
http://www.falexint.com

Combined wear-corrosion phenomena of metals and thin hard coatings. Other specialisms : Hard coatings, low friction coatings, lubrication and starved lubrication, corrosion and combined wear-corrosion phenomena.

M. Zahedul Huq
Research Assistant
Dept. of Metallurgy and Materials Engineering, Katholieke Universiteit Leuven
de Croylaan-2, B-3001 Leuven, BELGIUM
Ph:  + 32 16 32 12 38 & + 32 16 32 12 60; Fax:    + 32 16 32 19 91
Zahedul.huq@mtm.kuleuven.ac.be

Tribology of hard coatings and ceramics, fretting, tribo-chemistry, mechanical property measurements of thin films by using nanoindenter, design of tribotest equipment, surface modification of materials.

Professor Bozet Jean
Construction des machines
Bât. C3 Construction des machines,  rue E. Solvay, 21
4000 Liège
Ph +32-4-3669315; Fax: +32-4-2540151
Jean.Bozet@ulg.ac.be
http://www.ulg.ac.be/tribolog

 



Canada

Professor C.M. Hansson, B.Sc. (ARSM), PhD., DIC (Imperial College, UK)
Dept of Mechanical Engineering
Univ. of Waterloo
Waterloo, Ontario, Canada  N2L 3G1
Ph: (519) 888-4889; Fax: (519) 725-9971
chansson@nh3adm.uwaterloo.ca
http://mecheng1.uwaterloo.ca/dept/hansson.html

Durability of concrete, Corrosion, Erosion and Wear

Dr. Masoud Kasrai
Senior Research Scientist
Department of Chemistry, University of Western Ontario
London, On N6A 5B7, Canada
Ph:(519) 661-2111 X 6332; Fax: (519)661-3022
mkasrai@uwo.ca

Lubricant additives, Chemical characterization of antiwear films using X-ray absorption Spectroscopy and other surface techniques.

Professor R. Lal Kushwaha, Ph.D., P.Eng.,
Agricultural and Bioresource Engineering Department
University of Saskatchewan
57 Campus Drive, Saskatoon, SK, S7N 5A9 Canada
Ph:306-966-5313 (work); Fax:306-966-5334
Lal_Kushwaha@mackenzie.usask.ca
http://www.engr.usask.ca/research/ag/kushwaha.html/

My tribology research includes wear, friction and lubrication in agricultural machinery applications including engines.

Professor J.G. Lenard  BASc, MSc, PhD
Materials Engineering and Processing Group
Department of Mechanical Engineering,
University of Waterloo
Ph: (519) 888-4567 x3114; Fax: (519) 888-6197
jglenard@mechoffice.watstar.uwaterloo.ca
http://mecheng1.uwaterloo.ca/personnel/faculty/jglenard.html

Physical and Mathematical Simulation of Thermal-Mechanical Processing of Microalloyed Steels, Mathematical Modelling of the Flat Rolling Process, Friction and Lubrication in Flat Rolling, Heat Transfer Coefficient in Hot Rolling

Dr. John B Medley
Dept of Mechanical Engineering
Univ. of Waterloo
Waterloo, Ontario, Canada  N2L 3G1
Ph: (519) 888-4567 x4784; Fax: (519) 888-6197
jmedley@konec.uwaterloo.ca
http://mecheng1.uwaterloo.ca/dept/medley.html

Tribology, Wear of Metal-Metal Hip Implants, Lubrication of Large Spring-Supported Thrust Bearings, Influence of Lubricant Additives on Rheology of Elastohydrodynamic Film

Mike Munroe
Owner/Senior Technical Analyst
Munroe Equipment Sciences Inc.
445 Kensington St.
Winnipeg, MB, R3J-1J8, Canada
Ph: 204-779-2200; Fax:204-79-2424
munroem@awnet.com

Ferrography and the application to Diesel Engines and Turbine Aircraft engines.

Dr. Michel Murphy
STLE president 200-2001
4405 Canadien Pacifique St.
Montreal, Quebec, Canada, H1Y 3H8
Ph :514-953-7034;   Fax. : 514-521-5940
info@michelmurphy.com
www.michelmurphy.com

Dr. Chinnia Subramanian, Ph. D.
Surface Engineered Products Corp.
2415-101 St.   S.W.
Edmonton, AB, Canada T6X 1A1
Ph: +1(780)431-4103; Fax: +1(780)431-4101
csubrama@westaim.com
http://www.surfaceengineered.com

My research interests are surface engineering, wear of materials and high
temperature coatings.

Dr. Yongsong Xie
Research Officer
Surface Technologies/Tribology Group, National Research Council Canada
3250 East Mall, Vancouver, BC , Canada V6T 1W5
Ph: (604) 221-3074; Fax: (604) 221-3088
yongsong.xie@nrc.ca

Wear and related surface damages; Tribology of coatings

 



Chile

Octavio Catalan
Ingelube S.A.
Avda. Americo Vespucio 2760-H  Conchali
Santiago   -   Chile
Ph: 562 420 1450; Fax: 562 420 1449
ocatalan@ingelube.cl
www.ingelube.cl

Emission Espectroscopy RDE, Infrared Espectroscopy, Automatic Laser Particle Counter, Viscosity, Ferrography

 



China (PRC)

Professor L.L. Cao
State Key Lab of Tribology, Tsinghua University, Beijing 100084, P.R.China
Ph:: (010) 62594799; Fax: (010) 62594691
http://www.pim.tsinghua.edu.cn/pim/persons/cdr.html

Tribo-chemistry, surface science and boundary

Professor D.R. Chen
State Key Lab of Tribology, Tsinghua University, Beijing 100084, P.R.China
Ph:: (010) 62594799; Fax: (010) 62594691
dpicdr@mail.tsinghua.edu.cn
http://www.pim.tsinghua.edu.cn/pim/persons/cdr.html

Tribological effects of surfacetexture, lubrication by non-Newton lubrivcants, running-in of engine,tribology
design and monitoring of tribology system.

Professor Y.Z. Hu
State Key Lab of Tribology, Tsinghua University, Beijing 100084, P.R.China
Tel: (86)-10-62783160; Fax: (0086)-010-62782768
http://www.pim.tsinghua.edu.cn/tribo/subtribo/professors.html

Lubrication dynamics, tribological effects of surface texture, tribological behaviors of engine as well as
molecular dynamics in tribology.

Professor Yuansheng Jin
State Key Lab of Tribology, Tsinghua University, Beijing 100084, P.R.China
Ph: 010/62772509; FAX: 010/62784691
jinys@mail.tsinghua.edu.cn and jinys@pim.tsinghua.edu.cn
http://www.pim.tsinghua.edu.cn/tribo/subtribo/professors.html

Friction and wear of materials,coatings,especially at high temperature, as well as tribo-chemistry

Professor J.J. Liu
State Key Lab of Tribology, Tsinghua University, Beijing 100084, P.R.China
Tel: (86)-10-62783160; Fax: (0086)-010-62782768
http://www.pim.tsinghua.edu.cn/tribo/subtribo/professors.html

Friction and wear of materials, solid lubricants, coatings

Prof. Dr. Sy-Wei Lo
Dept. of Mechanical Engineering
National Yunlin University of Science and Technology
Touliu, Taiwan 640, R.O.China
Ph: 886-5-5342601 ext 4140; Fax: 886-5-5312062
losywei@ms26.hinet.net

Professor S.Z. Wen
State Key Lab of Tribology, Tsinghua University, Beijing 100084, P.R.China
Tel: (86)-10-62783160; Fax: (0086)-010-62782768
http://www.pim.tsinghua.edu.cn/tribo/subtribo/professors.html

Professor Xie Youbai
State Key Lab of Tribology, Tsinghua University, Beijing 100084, P.R.China
Tel: (86)-10-62783160; Fax: (0086)-010-62782768
http://www.pim.tsinghua.edu.cn/tribo/weiyuanhui/Exieyb.html

Engineering of Tribo-Systems, Tribological Design Expert Systems, Rotor Bearing, System Dynamics, Active Control of Vibration and Stability of Rotor Systems, Condition Monitoring and Fault Diagnosis of Machinery, Tribological Materials,
Electro-Magnetic Leviation, Lubrication and Wear of Cylinder - Piston Systems of ICE, Reliability of Machine Parts, etc.



Denmark

Dr. Christen A. Stræde
Tribology Centre, Danish Technological Institute
Kongsvang Allé 29, DK-8000 Århus C, Denmark
Ph: +45 89 43 83 99; Fax: +45 89 43 83 10
tribo@teknologisk.dk
http://www.teknologisk.com/196

 



Finland

Dr. Kenneth Holmberg, DTech
Head of Machine Technology Section,VTT Manufacturing Tech.
Technical Research Centre of Finland,
Laboratory of Engineering Production Technology
PO Box 1704, Metallimiehenkuja 6, Fin-02044 VTT Espoo, Finland
Ph: +358 9456 5370; Fax: [358] 9456 7002
kenneth.holmberg@vtt.fi



France

Laurent BAILLET
Maitre de Conferences
INSA de Lyon, Laboratoire de Mecanique des Contacts, Bat. 113
20, avenue Albert Einstein, 69621 Villeurbanne cedex, France
Ph : +33 4 72 43 89 37; Fax : +33 4 78 89 09 80
laurent.baillet@lmc.insa-lyon.fr

Friction, contact, impact, finite element, solid lubrification.

Dr. Yves BERTHIER
Directeur de Recherche CNRS
INSA de Lyon, Laboratoire de Mecanique des Contacts, Bat. 113
20, avenue Albert Einstein, 69621 Villeurbanne cedex, France
Ph : +33 4 72 43 84 46; Fax : +33 4 78 89 09 80
yves.berthier@lmc.insa-lyon.fr

Friction, wear, solid lubrication, coatings, third body and fretting

Antoinette Blouin
Université de Poitiers, Laboratoire de Mécanique des Solides,
SP2MI,Bd Pierre et Marie CURIE, BP 30179
86962 Futuroscope Chasseneuil Cedex - FRANCE
Antoinette.Blouin@lms.univ-poitiers.fr
Ph: +33-05-49-49-65-02

Rubbing of ceramic (SiC) in water, optical fiber sensor for  measurement of thin film thickness.

Dr Christine BOHER
Enseignant Chercheur
Centre de Recherche Outillage, Matériaux et Procédés
Ecole des Mines Albi Carmaux
Campus Jarlard - Route de Teillet
81000 ALBI cédex - France

PH: +33 5 63 49 31 69; Fax: +33 5 63 49 30 99
boher@enstimac.fr

Dr. Marcel Brendle
Directeur de Recherche
Institute de Chimie des Surfaces et Interfaces, I.C.S.I. UPR 9069
15, RUE Jean Starcky – B.P. 2488 – 68057, Mulhouse Cedex, FRANCE
m.brendle@univ-mulhouse.fr

Professor Dominique BONNEAU
LMS, University of Poitiers
4, Avenue de Varsovie
16021 Angouleme Cedex, FRANCE
 Ph : 33 5 45 25 19 79;  Fax : 33 5 45 67 32 19
dbonneau@iutang.univ-poitiers.fr
http://www-lms.univ-poitiers.fr/index.html

EHD Lubrication, Engine bearings,  Aerodynamic lubrication, Seals

Dr. Yanming CHEN
CETIM, 52, Av. Felix-louat , 60304 Senlis cedex France
Ph: +33 03 4467 3387; Fax: +33 03 4467 3158
yan-ming.chen@cetim.fr

Wear mechanismes analysis in industrie, Friction of ceramics and coatings, Friction of stainless steels, Vibrations produced by friction.

Sylvie DESCARTES
Research Engineer
INSA de Lyon, Laboratoire de Mecanique des Contacts, Bat. 113
20, avenue Albert Einstein, 69621 Villeurbanne cedex, France
Ph : +33 4 72 43 84 46; Fax : +33 4 78 89 09 80
sylvie.descartes@lmc.insa-lyon.fr

Tribology, solid lubrication, 3rd body flows, characterization tools, cryogenics, atmosphere influence.

Dr. Marie-Christine DUBOURG
Charge  de Recherche CNRS
INSA de Lyon, Laboratoire de Mecanique des Contacts, Bat. 113
20, avenue Albert Einstein, 69621 Villeurbanne cedex, France
Ph : 33 4 72 43 84 49; Fax : 33 4 78 89 09 80
marie-christine.dubourg@lmc.insa-lyon.fr

Frictional contact, coating, crack initiation, crack propagation, thermomechanic.

Khaled ELLEUCH
PHD STUDENT
Ecole Centrale de Lyon
Laboratoire de Tribologie et Dynamique des Systemes, UMR CNRS 5513
BP 163, 69131 ECULLY cedex, FRANCE
Phone : (33) (0)4 72 18 62 90, Fax : (33) (0)4 78 43 33 83
Khaled.Elleuch@ec-lyon.fr

Dr. Bernard FANTINO
LMC UMR 5514, Institut Europeen de Tribologie
INSA de Lyon, Batiment 113
20, avenue Albert Einstein
69621 Villeurbanne Cedex France
Ph : 33 (0)4 72 43 89 08; Fax : 33 (0)4 78 89 09 80
bernard.fantino@lmc.insa-lyon.fr
http://www.insa-lyon.fr/Laboratoires/LMC/present/pers/bfantino/bfantino.html

Bearings - Hydrodynamic

Dr. Michel FILLON
Universite de Poitiers, UFR Sciences
SP2MI, Laboratoire de Mecanique des Solides
Bd Pierre et Marie Curie, BP 30179
86962 FUTUROSCOPE CHASSENEUIL CEDEX,    FRANCE
Ph: +33.5.49.49.65.43; Fax: +33.5.49.49.65.04
Michel.Fillon@lms.univ-poitiers.fr

Hydrodynamic Lubrication, Thermoelastohydrodynamic regime, Tilting-pad journal bearing,  Plain journal bearings, Tilting-pad and fixed geometry thrust
bearings, Non laminar regime, Transient thermal effects,  Seizure, Dynamic behavior.

Pr. Louis FLAMAND
LMC UMR 5514, Institut Europeen de Tribologie
INSA de Lyon, Batiment 113
20, avenue Albert Einstein
69621 Villeurbanne Cedex France
Ph : 33 (0)4 72 43  85 81; Fax : 33 (0)4 78 89 09 80
louis.flamand@lmc.insa-lyon.fr
http://www.insa-lyon.fr/Laboratoires/LMC/present/pers/lflamand/lflamandl.html

Surface damages

Dr. Jean FRENE
Universite de Poitiers, UFR Sciences
SP2MI, Laboratoire de Mecanique des Solides
Bd Pierre et Marie Curie, BP 30179
86962 FUTUROSCOPE CHASSENEUIL CEDEX,    FRANCE
Phone: +33.5.49.49.65.32; Fax:  +33.5.49.49.65.04
Jean.Frene@lms.univ-poitiers.fr
http://www-lms.univ-poitiers.fr/

Dr Yves Gachon
HEF R&D
Surface Mechanics and Tribology Department
ZI Sud
42166 Andrezieux Boutheon CEDEX
yves_trib@yahoo.fr

Ing. Sophie HANNEL
PhD student
Ecole Centrale de Lyon
Laboratoire de Tribologie et Dynamique des Systemes, UMR CNRS 5513
BP 163, 69131 ECULLY cedex, FRANCE
Ph : (33) (0)4 72 18 62 69;  Fax : (33) (0)4 78 43 33 83
Sophie.Hannel@ec-lyon.fr

Tribology, Fretting, Wear, Modelling, Contact mechanics, Finite element analysis, Fretting in electrical contacts...

Ivan IORDANOFF
Maitre de Conferences
INSA de Lyon, Laboratoire de Mecanique des Contacts, Bat. 113
20, avenue Albert Einstein, 69621 Villeurbanne cedex, France
Ph : 33 4 72 43 89 37; Fax : 33 4 78 89 09 80
ivan.iordanoff@lmc.insa-lyon.fr

Granular media, powder, rheology, third body behaviour, tribology,

Dr Philippe KAPSA
Laboratoire de Tribologie et Dynamique des Systèmes
Ecole Centrale de Lyon, BP 163
69131 ECULLY Cedex, FRANCE
Ph: 33 (0)4 72 18 62 74; Fax: 33 (0)4 78 43 33 83
philippe.kapsa@ec-lyon.fr
http://www.ec-lyon.fr/recherche/ltds/index.html

Friction and wear phenomena; Dry and lubricated wear friction and wear test; Hard coatings composites; Experimental aspects of tribology, standardisation; Study of surface mechanical properties by indentation technic; Systemic approach of tribology

Dr. Ton A.A. Lubrecht
Institut National des Sciences Appliquees
Laboratoire de Mechanique des Contacts, Bat. 113
20, ave. Albert Einstein
69621 Villeurbanne Cedex, France
Ph: (011) 33-472-43-82-24; Fax: (011) 33-478-89-09-80
ton.lubrecht@lmc.insa-lyon.fr

Laurent MAHE, PhD Student
LMC UMR 5514, Institut Europeen de Tribologie
INSA de Lyon, Batiment 113
20, Avenue Albert Einstein
69621 Villeurbanne Cedex, France
Ph : 33 (0)4 72 43 79 62; Fax : 33 (0)4 78 89 09 80
laurent.mahe@lmc.insa-lyon.fr
http://www.insa-lyon.fr/Laboratoires/LMC/present/pers/lmahe/lmahe.html

Dry friction, wear, polymer, third body approch, oil-free piston rings, contact temperature, FEM

Dr. Daniel NELIAS
LMC UMR 5514, Institut Europeen de Tribologie
INSA de Lyon, Batiment 113
20, avenue Albert Einstein
69621 Villeurbanne Cedex France
Ph : 33 (0)4 72 43 84 90; Fax : 33 (0)4 78 89 09 80
daniel.nelias@lmc.insa-lyon.fr
http://www.insa-lyon.fr/Laboratoires/LMC/present/pers/dnelias/dnelias.html

Rolling Bearing - Rolling contact, Fatigue - EHL contacts

Ing. Eric NICCOLINI
PhD Student
LMC UMR 5514, Institut Europeen de Tribologie
INSA de Lyon, Batiment 113
20, Avenue Albert Einstein
69621 Villeurbanne Cedex, France
Ph : 33 (0)4 72 43 79 62; Fax : 33 (0)4 78 89 09 80
eric.niccolini@lmc.insa-lyon.fr
http://www.insa-lyon.fr/Laboratoires/LMC/present/pers/eniccoli/eniccoli.html

Wheel-Rail Contact - Dry Friction Phenomena - Morphologies and Rheologies of Third Body -Modelling - Experimental Aspects of Adhesion

Dr. Patrick MASPEYROT
Maître de Conférences
Université de Poitiers, Faculté des  Sciences
S.P.2M.I., Téléport 2, Bd Pierre et Marie Curie, BP 30179
86962 Futuroscope Chasseneuil  Cedex, FRANCE
Ph:  + 33-5-49-49-65-44; Fax: + 33-5-49-49-65-04
maspey@zeus.univ-poitiers.fr

Bearings, Hydrodynamic, Thrust bearings, Cavitation, Multigrid techniques

Xavier ROIZARD
Maître de Conférences
IUT département GMP
30, avenue de l'Observatoire - BP 1559
25009 BESANCON cédex, France
Ph :+33 3 81 66 33 ; Fax : +33 3 81 66 68 80
xavier.roizard@univ-fcomte.fr

Friction, deep drawing, coatings, lubrication and third body.

Dr. Philippe SAINSOT
LMC UMR 5514, Institut Europeen de Tribologie
INSA de Lyon, Batiment 113
20, avenue Albert Einstein
69621 Villeurbanne Cedex France
Ph : 33 (0)4 72 43 89 42; Fax : 33 (0)4 78 89 09 80
philippe.sainsot@lmc.insa-lyon.fr
http://www.insa-lyon.fr/Laboratoires/LMC/present/pers/psainsot/psainsot.html

Dry contacts - plasticity - Roughness

Mr. Georges TOURLONIAS
LMC UMR 5514, Institut Europeen de Tribologie
INSA de Lyon, Batiment 113
20, avenue Albert Einstein
69621 Villeurbanne Cedex France
Ph : 33 (0)4 72 43 82 08; Fax : 33 (0)4 78 89 09 80
georges.tourlonias@lmc.insa-lyon.fr
http://www.insa-lyon.fr/Laboratoires/LMC/present/pers/gtourlon/gtourlon.html

Bernard TOURNERIE
Maître de conférences, Université de Poitiers,  UFR SFA
Laboratoire de Mécanique des Solides, SP2MI, Bd. 3, Téléport 2, BP 179
86960 Futuroscope CEDEX, FRANCE
Ph. +(33) 05 49 49 65 66; Fax. +(33) 05 49 49 65 04 or +(33) 05 49 49 65 66
tournerie@lms.univ-poitiers.fr
http://www-lms.univ-poitiers.fr/index.html

Mechanical face seals: liquid seals , gas seals, grooved and notched seals; Theory and numerical modelisation of lubrication, dynamic behavior, thermal behaviour of mechanical face seals; Experimental investigations on lubrication, dynamic behavior, thermal behaviour of mechanical face seals; Application of infrared thermography in tribology and lubrication.

Pr. Philippe VELEX
LMC UMR 5514, Institut Europeen de Tribologie
INSA de Lyon, Batiment 113
20, avenue Albert Einstein
69621 Villeurbanne Cedex France
Ph : 33 (0)4 72 43 84 51; Fax : 33 (0)4 78 89 09 80
philippe.velex@lmc.insa-lyon.fr
http://www.insa-lyon.fr/Laboratoires/LMC/present/pers/pvelex/pvelex.html

Gears - dynamic of gearboxes

Dr. Philippe Vergne
LMC UMR 5514, Institut Europeen de Tribologie
INSA de Lyon, Batiment 113
20, avenue Albert Einstein
69621 Villeurbanne Cedex France
Ph : 33 (0)4 72 43 81 47; Fax : 33 (0)4 78 89 09 80
philippe.vergne@lmc.insa-lyon.fr

Dr. Fabrice VILLE
LMC UMR 5514, Institut Europeen de Tribologie
INSA de Lyon, Batiment 113
20, avenue Albert Einstein
69621 Villeurbanne Cedex France
Ph : 33 (0)4 72 43 87 52; Fax : 33 (0)4 78 89 09 80
fabrice.ville@lmc.insa-lyon.fr
http://www.insa-lyon.fr/Laboratoires/LMC/present/pers/fville/fville.html

Lubricant contamination - Rolling contact fatigue - dynamic of gears (experimental studies)

 


Germany

Dr. Vasilios Bakolas
Zentrale Berechnung - Grundlagen
INA-Schaeffler KG, Industriestrasse 1-3
91074 Herzogenaurach, Germany
Ph. +49 9132 82-1256; Fax: +49 9132 82-451256
vasilios.bakolas@de.ina.com
www.ina.com


Gears, Bearings, Roughness characterization, EHD and Mixed Lubrication Modeling.

Prof. Dr. W. J. Bartz
Technische Akademie Esslingen
Postfach 12 65
D-73748 Ostfildern
Phl: +49 - 7 11 - 3 40 08 10 23; Fax: +49 - 7 11 - 3 40 08 27
tae@rz.fht–esslingen.de
http://www.tae.de

Lubrication; lubricants

Prof. Dr. H. Berns
Ruhr-Universität Bochum
Institut f. Werkstoffe
Universitätsstr. 150 - PF 10 21 48, D-44801, Bochum
Ph: +49 - 2 34 - 7 00 59 64
Incomplete information: Any help?E-mail: .....;  Homepage: ......;
Hightemperature tribology; hard metals

Dr. D. Bettge
TU Berlin
Institut für Mechanik, Sekr. C8
Straße des 17. Juni 135, D-10623, Berlin
Ph.: 3 14-2 21 54  Fax.: 3 14-2 14 82
dirk.bettge@tu-berlin.de
Incomplete information: Any help?  Homepage: ......; Areas of reaserch / interest/expertise:......

Dr.-Ing. E. Broszeit
TH Darmstadt -Institut f. Werkstoffkunde
Abt. Tribologie
Grafenstr. 2 - PF 11 09 40, D-64283, Darmstadt
Ph: +49 -  61 51 - 16 21 15 or 25 40
Incomplete information: Any help?E-mail: .....;  Homepage: ......
Tribology of Metals and Machines

Prof. Dr.-Ing. Ludger Deters
Otto-von-Guericke-Universität Magdeburg
Institut f. Maschinenkonstruktion (IMK)
Lehrstuhl f. Masch.elemente u. Tribol.
Universitätsplatz 2, D-39106, Magdeburg
Ph: +49 - 3 91 - 6 71-87 92; Fax.: +49 - 3 91 - 67 11166
Incomplete information: Any help?E-mail: .....;  Homepage: ......
Tribology of machines and machine elements

Dr.-Ing. O. Deutscher
Betriebsforschungsinstitut, VDEh
Institut f. angewandte Forschung
Sohnstr. 65, D-40237, Düsseldorf
Ph: +49 - 2 11 - 6 70 72 43; Fax: +49 - 2 11 - 6 70 76 09
Incomplete information: Any help?E-mail: .....;  Homepage: ......
Tribology of steel products and tools

Dipl.-Ing. F. Dürr
Forschungsinstitut der Forschungsgesellschaft f. Uhren- u. Feingerätetechnik e.V.
Breitscheidstr. 2b, 70174, Stuttgart
Ph: +49 - 7 11 - 1 21 31 79
Incomplete information: Any help?E-mail: .....;  Homepage: ......
Tribology of polymers

Prof. Dr.-Ing. Dr.h.c. G.W. Ehrenstein
Am Weichselgarten 9
D-91058 Erlangen-Tennenlohe
Ph: +49 -  91 31 - 85-2 97 00; Fax: +49 -  91 31 - 85-2 97 09
ehrenstein@lkt.uni-erlangen.de

Tribology of polymers

Dr. J. Eickemeyer
Institut f. Festkörper- u. Werkstoffforschung (IFM) Dresden e.V.
Inst. f. Metallische Werkstoffe
Abt. Umformung u. Tribologie
Winterbergstr. 28, D-01277, Dresden
Ph: +49 - 3 51 - 2 32 22 03; Fax: +49 - 3 51 - 2 32 25 95
Incomplete information: Any help?E-mail: .....;  Homepage: ......
Tribology in forming processes; dry lubricants

Prof. Dr.-Ing. Paul Feinle
FH f. Technik Mannheim - FB Masch.bau
Institut für Tribologie
Speyerer Str. 4, D-68163, Mannheim
Ph: +49 - 6 21 - 2 92 65 40 /65 41: Fax: +49 - 6 21 - 2 92 65 42
p.feinle.@fh-mannheim.de

Tribology of machine elements; polymers

Prof. Dr.-Ing. Alfons Fischer
Universität Gesamthochschule Essen
Werkstofftechnik FB 12
Postfach 10 37 64 , D-45117, Essen
Ph: +49 - 2 01 - 1 83 26 55; Fax: +49 - 2 01 - 1 83 25 08
Incomplete information: Any help?E-mail: .....;  Homepage: ......
Hightemperature tribology, Biomaterial-Tribology

Prof. Dr. G. Fleischer
Otto Guericke Universität Magdeburg
Postfach 41 20, D-39016, Magdeburg
Ph: +49 -  37 91 - 59 26 73; Fax: +49 -  37 91 - 59 51 26
Incomplete information: Any help?E-mail: .....;  Homepage: ......
Machine elements

Dr.-Ing. J. Föhl
Universität Stuttgart
Staatl. Materialprüfanstalt (MPA)
Pfaffenwaldring 32, D-70569, Stuttgart
Ph:  (+49) 711 / 685-2564; Fax (+49) 711 / 685-2635
foehl@mpa.uni-stuttgart.de
http://www.uni-stuttgart.de/en/

Erosion, abrasion

Dr.-Ing. habil. Rainer Franke
Abteilungsleiter - Abt. Metalle
Institut f. Materialforschung u. Anwen-
dungstechnik GmbH (IMA)
Hermann-Reichelt-Str. (PF 80 01 44), D-01109, Dresden
Ph: +49 - 3 51 - 8 83 72 16; Fax: +49 - 3 51 - 8 83 75 17

Tribology of metals

Prof. Dr. K. Friedrich
Institut f. Verbundwerkstoffe GmbH
Erwin-Schrödinger-Str. , D-67663, Kaiserslautern
Ph: +49 - 6 31 - 2 01 72 01; Fax: +49 - 6 31 - 2 01 71 99
friedrich@ivw.uni-kl.de

Tribology of polymer-composites

Prof. Dr.-Ing. Andreas Gervé
Institut f. Angewandte Verschleiß-   forschung GmbH (IAVF)
Im Schlehert 32, D-76187, Karlsruhe
Ph: +49 - 7 21 - 9 55 05-0; Fax: +49 - 7 21 - 9 55 05 28
iavf@aol.com

Tribology of combustion empires
 

Gesellschaft für Tribologie
Ernststraße 12
D-47443 Moers
Ph.:+49-2841-54213; Fax: +49-2841-59478
tribologie@gft.int.de
http://www.gft.int.de
Dr. Th. Gradt
Bundesanstalt für Materialforschung und –prüfung (BAM) - Labor VIII.12 „
Schwingungs-verschleiß; Mikrotribologie; Kryotribologie“
D-12200 Berlin
Ph.: +49 – (0)30 – 81 04 35 31; Fax: +49 – (0)30 – 81 04 18 17
thomas.gradt@bam.de

Kryo-Tribology (cryo-tribology)

Dr. Ude Dirk Hangen
Head of NanoTribology Laboratory SURFACE
Rheinstrasse 7, 41836 Hueckelhoven, Germany
Ph.: +49 2433 970 305
u.hangen@surface-tec.com
www.surface-tec.com

Friction and wear under point contacts

Prof. Dr.-Ing. Roland Junghans
Lehrstuhl Tribologie - Leiter des Lehrstuhls
Postfach 964, D-09170, Chemnitz
Ph: +49 - 3 71 - 5 31 22 75; Fax: +49 - 3 71 - 5 31 22 81
Incomplete information: Any help?E-mail: .....;  Homepage: ......
Tribology of bearing materials

Dr. W. Hübner
Bundesanstalt für Materialforschung und –prüfung (BAM) - Labor VIII.12 „
Schwingungs-verschleiß; Mikrotribologie; Kryotribologie“
D-12200 Berlin
Ph: +49 – (0)30 – 81 04 35 31; Fax: +49 – (0)30 – 81 04 18 17
wolfgang.huebner@bam.de

Kryo-Tribology

Prof. Dr.-Ing. Klaus Knothe
Institut für Luft- und Raumfahrt (ILR)
FG Konstruktionsberechnung - Sekr. F 5
TU Berlin, Marchstr. 12, D-10587, Berlin
Ph: +49 – 30 - 3 14-2 23 45; Fax: +49 – 30 - 3 14-2 28 66
knothe@ice.tu-berlin.de

Dr.-Ing. Dieter Klaffke
Bundesanstalt fuer Materialforschung und -pruefung (BAM)
(Federal Institute for Materials Research and Testing)
12200 Berlin
Ph: +49-30-1804-1810; Fax: +49-30-1804-1817
dieter.klaffke@bam.de

Fretting, recipodating sliding;Coatings, ceramics

Dr. H. Kloß
Bundesanstalt für Materialforschung und –prüfung (BAM) - Labor VIII.11
Reibungs- und Verschleiß-prüftechnik; Bauteiltribologie“
D-12200 Berlin
Ph: +49 – (0)30 – 81 04 18 14; Fax: +49 – (0)30 – 81 04 18 17
heinz.kloss@bam.de

Wear modelling, coatings, ceramics

Prof. Dr.-Ing. Klaus Knothe
Institut für Luft- und Raumfahrt (ILR)
FG Konstruktionsberechnung
TU Berlin - Sekr. F 5, Marchstr. 12 , D-10587 Berlin
Ph: +49 – (0)30 - 3 14-2 23 45; Fax: +49 – (0)30 - 3 14-2 28 66
knothe@ice.tu-berlin.de

FEM-Modelling for rail traction

Professor Dr. Eric Kuhn
Laboratory of Machine Elements and Tribology (MuT)
University of Applied Sciences, Hamburg
FH Hamburg, FB M+P,Tribology
Berliner Tor 21, D-20099 HAMBURG, Germany
Ph: +49 40 2488 4343; Fax : +49 40 2488 2658
kuhn@rzbt.fh-hamburg.de
http://www.fh-hamburg.de/fh/fb/m/tribologie/index.html

Grease tribology (rheology)

Dr. Huiwen Liu B.S., M.S., Ph.D.
Institute of Physics, Technology University of Ilmenau,
Weimarer Strasse 32, PF 100565, D-98684 Ilmenau, Germany
Ph: +49-3677-693778, Fax: +49-3677-693205
liu@dachs.physik.tu-ilmenau.de
http://members.tripod.com/~hwliu/Home.html

Tribology of hard carbon films, ceramics; Microtribology of computer head disk interface(HDI) and micro-electro-mechanics system (MEMS ); Surface modification of materials and its application; Materials design, preparation and characterization

Dr. K. Michaelis
TU München - Lehrstuhl f. Masch.elemente
Forschungsstelle f. Zahnräder und
Getriebebau (FZG)
Arcisstr. 21, D-80333, München
Ph: +49 – 89 -21 05 28 72
Incomplete information: Any help?E-mail: .....;  Homepage: ......
Tribology of gears

Prof. Dr.-Ing. G.-P. Ostermeyer
TU Berlin - 1. Institut f. Mechanik
Sekr. C 8, Straße des 17. Juni 135, D-10623, Berlin
Ph: +49 – 30 - 3 14 - 2 14 81 (Fr. Kohli); Fax: +49 – 30 - 3 14 -2 14 82
ostermeyer@c8m42.pi.tu-berlin.de

Prof. Dr.-Ing. Ekkehard Piwowarsky
TH Darmstadt, FB Kunststofftechnik
Haardtring 100, D-64295 Darmstadt
Ph: +49 – 6151 - 16 85 21; Fax: +49 –6151 -16 89 77
Incomplete information: Any help?E-mail: .....;  Homepage: ......
Machine elements, sliding bearings

Dr. H. Sander
Bundesanstalt für Materialforschung und –prüfung (BAM) - Labor VIII.12
Schwingungs-verschleiß; Mikrotribologie; Kryotribologie, D-12200 Berlin
Ph: +49 – (0)30 – 81 04 35 31; Fax: +49 – (0)30 – 81 04 18 17
harro.sander@bam.de

Mikrotribology

Dr. Erich Santner
Dir. u. Prof.
Bundesanstalt fuer Materialforschung und -pruefung (BAM)
(Federal Institute for Materials Research and Testing)
12200 Berlin
Ph: +49-30-1804-1810; Fax: +49-30-1804-1817
erich.santner@bam.de

Mikrotribology, polymers, test-methods

Dr. Matthias Scherge
Microtribology Group
Technische Universitaet Ilmenau
PF 100565, D-98684 Ilmenau, Germany
Ph: +49 3677 693782; Fax +49 3677 693771
Matthias.Scherge@physik.tu-ilmenau.de
http://www.physik.tu-ilmenau.de/tribo/scherge.html

Dr. Johannes Schneider
Institute of Materials Science II, Univ. of Karlsruhe and
Institute of Materials Research I, Research Center Karlsruhe (FZK)
P.O. Box 3640, D-76021, Germany.
Ph: +49 7247-823897; Fax: +49 7247 824567
johannes.schneider@imf.fzk.de

Prof. Dr.-Ing. Klaus Spiegel
Fachhochschule Düsseldorf
Josef-Gockeln-Str. 9
(Georg-Glock-Str. 15?), D-40474, Düsseldorf
Ph: +49 -2 11- 4 35 14 27; Fax: +49 - 2 11 - 4 35 15 09
Incomplete information: Any help?E-mail: .....;  Homepage: ......
Machine-elements, bearings

Dipl.-Ing. Werner Stehr
Dr. Tillwich GmbH - Etsyntha Chemie
Murber Steige 26
D-72160 Horb a. N.
Ph: +49  - 74 51- 23 41; Fax: +49 - 74 51- 76 24
DR.TILLWICH@T-ONLINE.DE

Tribology of polymers; Special lubricants for polymers

Dr.rer.nat. Ulrich Stolz
Robert-Bosch-GmbH - FV/FLM
Postfach 10 60 50
D-70049 Stuttgart
Ph: +49 - 7 11-4 79 07 19; Fax: +49 - 7 11 -8 11-76 07
stolz@flm.sh.bosch.de

Tribology of coatings, car parts

Dr.-Ing. Mathias Woydt
Bundesanstalt fuer Materialforschung und -pruefung (BAM)
(Federal Institute for Materials Research and Testing)
12200 Berlin
Ph: +49-30-1804-1810: Fax: +49-30-1804-1817
mathias.woydt@bam.de

Tribology of ceramics, car parts

Professor Karl Heinz Zum Gahr
Institute of Materials Science II, Univ. of Karlsruhe and
Institute of Materials Research I, Research Center Karlsruhe (FZK)
P.O. Box 3640, D-76021, Germany.
Ph: +49 7247-823897; Fax: +49 7247 824567
Jutta.Howell@imf.fzk.de (secretary)

Tribology of ceramics, mikrotribology



Greece

Dipl.-Ing. P. Aichouh
Laboratory for Machine Tools and Manufacturing Engineering, Mechanical Engineering Department
Aristotle University of Thessaloniki, Gr-54006, Greece.
Ph:: +03031 996028, Fax: +03030 996059
paichouh@egnatia.ee.auth.gr

Manufacturing processes, Cutting.

Dr.-Ing. S. Antoniou
Technological Education Institute of Piraeus, P. Ralli & Thivon 250, 1244 Aegaleo, Greece
Ph: ++301 5691405 / ++301 6208872, Fax: ++301 5691705

Manufacturing Processes, Cutting.

Dipl.-Ing. Vasilios Bakolas
Laboratory of Machine Elements and Machine Design, Aristotle University of Thessaloniki, PO BOX 406 GR 54006 Thessaloniki, Greece
Tel: +30-31-996035, Fax: +30-31-996037
bmpak@bacchus.meng.auth.gr

Gears, Tribological tests, Lubrication.

Prof. Dr.-Ing. habil K.-D. Bouzakis
Laboratory for Machine Tools and Manufacturing Engineering, Mechanical Engineering Department
Aristotle University of Thessaloniki, Gr-54006, Greece.
Ph:: +03031 996021 / +03031 996079, Fax: +03030 996059
bouzakis@eng.auth.gr

Cutting, Manufacturing processes, Coatings, Gears, Bearings, Tool Wear.

Dr.-Ing. K. David
Laboratory for Machine Tools and Manufacturing Engineering, Mechanical Engineering Department
Aristotle University of Thessaloniki, Gr-54006, Greece.
Ph:: +03031 996026, Fax: +03030 996059
david@eng.auth.gr

Manufacturing processes, Coatings, Bearings.

Dipl.-Ing. Nikolaos Drivakos
Laboratory of Machine Elements and Machine Design, Aristotle University of Thessaloniki, PO BOX 406
GR 54006 Thessaloniki, Greece
tel: +30-31-996035, Fax: +30-31-996037
ndrivakos@bacchus.meng.auth.gr

Gears, Tribological tests, Lubrication.

Assist. Prof. Dr.-Ing. K. Efstathiou
Laboratory for Machine Tools and Manufacturing Engineering, Mechanical Engineering Department
Aristotle University of Thessaloniki, Gr-54006, Greece.
Ph:: +03031 996044, Fax: +03030 996059
eftathi@eng.auth.gr

Manufacturing processes, Tool Wear, Cutting.

Dr. Susan Enders
Max-Planck-Institut für Metallforschung
Seestrasse 71; D-70714 Stuttgart, Germany
Ph:+49 711 2095-128; Fax: +49 711 2095-120
enders@mf.mpg.de
http://finix.mpi-stuttgart.mpg.de/mpi/index.html

Micro-nanotribology, biological microtribology

Dr.-Ing. N. Hassiotis
University of Thessaly, Pedion Areos, 38334 Volos, Greece
Ph: ++30 421 69781, Fax: ++30 42169787
Incomplete information: Any help?E-mail: .....;  Homepage: ......
Manufacturing Processes, Cutting.

Assist. Prof. Dr.-Ing. C. Karachaliou
Laboratory for Machine Tools and Manufacturing Engineering, Mechanical Engineering Department
Aristotle University of Thessaloniki, Gr-54006, Greece.
Ph:: +03031 996004, Fax: +03030 996059
hariklia@eng.auth.gr

Manufacturing processes, Cutting.

Dipl.-Ing., MSc G. Koutoupas
Laboratory for Machine Tools and Manufacturing Engineering, Mechanical Engineering Department
Aristotle University of Thessaloniki, Gr-54006, Greece.
Ph:: +03031 996028, Fax: +03030 996059
greg@egnatia.ee.auth.gr

Manufacturing processes, Cutting.

Dipl.-Ing. A. Lontos
Laboratory for Machine Tools and Manufacturing Engineering, Mechanical Engineering Department
Aristotle University of Thessaloniki, Gr-54006, Greece.
Ph:: +03031 996026, Fax: +03030 996059
lontos@eng.auth.gr

Manufacturing processes, Bearings, Tribological tests.

Dipl.-Ing. N. Michailidis
Laboratory for Machine Tools and Manufacturing Engineering, Mechanical Engineering Department
Aristotle University of Thessaloniki, Gr-54006, Greece.
Ph:: +03031 996016, Fax: +03030 996059
nmichail@eng.auth.gr

Manufacturing processes, Cutting, Coatings.

Assist. Prof. Dr.-Ing. Athanassios Mihailidis
Laboratory of Machine Elements and Machine Design, Aristotle University of Thessaloniki, PO BOX 406, GR 54006 Thessaloniki, Greece
Tel: +30-31-99-6073, Fax: +30-31-99-6037
mihailidis@meng.auth.gr

 Gears, Tribological tests, Lubrication.

Assoc. Prof. Dr.-Ing. S. Mitsi
Laboratory for Machine Tools and Manufacturing Engineering, Mechanical Engineering Department
Aristotle University of Thessaloniki, Gr-54006, Greece.
Ph:: +03031 996043, Fax: +03030 996059
mitsi@eng.auth.gr

Mechanism and Robots, Bearings.

Dr.-Eng. C. Pandajaras
University of Thessaly, Pedion Areos, 38334 Volos, Greece
Ph: ++30 421 6978, Fax: ++30 42169787
Incomplete information: Any help?E-mail: .....;  Homepage: ......
Manufacturing Processes, Cutting.

Lecture Dr.-Ing. G. Petropoulos
Department of Mechanical and Indastrial Engineering, University of Thessaly, Pedion Areos, 38334 Volos, Greece.
Ph:: ++30 421 74064, Fax: ++30 421 69787
gpetrop@uth.gr

Manufacturing Processes, Cutting.

Dipl.-Ing. A. Siganos
Laboratory for Machine Tools and Manufacturing Engineering, Mechanical Engineering Department
Aristotle University of Thessaloniki, Gr-54006, Greece.
Ph:: +03031 996016, Fax: +03030 996059
asiganos@egnatia.ee.auth.gr

Manufacturing processes, Cutting, Coatings.

Assist. Prof. Dr-Ing. I. Tsiafis
Laboratory for Machine Tools and Manufacturing Engineering, Mechanical Engineering Department
Aristotle University of Thessaloniki, Gr-54006, Greece.
Ph: +03031 996034, Fax: +03030 996059
tsiafis@eng.auth.gr

Manufacturing processes, Mechanisms and Robots.

Dr.-Ing. N. Vaxevanidis
University of Thessaly, Keffalinias 25, 11257 Athens, Greece
Ph: ++301 8223456, Fax: ++301 3428138
Incomplete information: Any help?E-mail: .....;  Homepage: ......
Manufacturing Processes, Cutting.

Dr.-Ing. N. Vidakis
Laboratory for Machine Tools and Manufacturing Engineering, Mechanical Engineering Department
Aristotle University of Thessaloniki, Gr-54006, Greece.
Ph: +03031 996026, Fax: +03030 996059
vidakis@eng.auth.gr

Manufacturing processes, Cutting, Tool Wear, Coatings, Bearings, Tribological tests.

 



Hong Kong

Dr. Lawrence KY Li, PhD
Department of Manufacturing Engineering & Engineering Management
City University of Hong Kong
Tat Chee Aveneue,Kowloon, Hong Kong
Ph: 2788 8406 Fax: 2788 8423
mekyli@cityu.edu.hk

Harding surface coatings, Wear, Micro EHL, Thin Film Lubrication

Dr. Patrick P.L. Wong
Associate Professor
City University of Hong Kong, 83 Tat Chee Avenue
Kowloon, Hong Kong
Fax: (852) 2788 8423
meplwong@cityu.edu.hk

High Pressure Rheology of Liquid Lubricants, Tribological Properties of Hard Surface Coating, EHL



India

Avinash Kumar Agarwal BE, MTech.
Senior Research Fellow
Centre for Energy Studies, Indian Institute of Technology, Delhi
Hauz Khas, New Delhi-110016, India
Ph. +91-11-6521517, 6521279; Fax. +91-11-6862208
avinashagarwal@hotmail.com and avinash@ces.iitd.ernet.in

Alternative fuels for diesel engines, Biodiesel production and utilisation, Tribology of Lubricating oils, Environmental sciences

Dr(Mrs) Jayashree Bijwe M. Tech, Ph.D.
Asst Prof
Industrial Tribology Machine Dynamics & Maintenance Engineering
Centre,(ITMMEC)
Indian Institute of Technology, Hauz Khas ,New Delhi 110016, India
Ph:  91-011- 6857658 ext 5051; Fax 91-011-6857658
jbijwe@hotmail.com

Tribology of Engineering polymers & composites, Friction & antifriction materials,condition monitoring of tribo-components through oil analysis

Professor Sanjay Kumar Biswas
Department of Mechanical Engineering
Indian Institute of Science
Bangalore 560 012.
Ph: : +91 80 309 2284; Fax: +91 80 004 1648
skbis@mecheng.iisc.ernet.in
http://www.mecheng.iisc.ernet.in/homes/biswas.html

Nano Indentation; Wear and seizure of Al-Si Alloys; Wear mechanisms of metals and ceramics; Studies on ceramic matrix composite materials; Experimental work with some emphasis on modelling; Theoretical models involving contact mechanics and
elasticity theory

Dinakar.D, M.S.
EACoE, 10th Floor
Innovator, ITPL
Bangalore, India
d-dinakar@mailcity.com

Contact Fatigue,Thermal Spraying, and Contact Stressanalysis for the layered structures and their 3-D visualisation.

N.  Govindarajan MS 
Indian Institute of Technology
Madras
govind_iitm@yahoo.com


Contact fatigue, PowderMetallurgy, and ferrography

Dr. Harish Hirani
Visiting  Faculty Member (Lecturer, Sr. Grade)
Department of Mechanical Engineering
Indian Institute of Technology Bombay
Powai, Mumbai-400 076, INDIA
hirani@me.iitb.ernet.in , hirani_h@hotmail.com
Ph: +91-022-576 7535 (Office), Fax: +91-22- 579 6875 (Dept.), +91-22-578 3480  (IIT,  Main)

Hydrodynamic bearings, Engine journal bearing, Dynamics of ball bearings, composite rotors

Dr. Satish Vasu Kailas  B. Tech., M. Eng., Ph. D.
Assistant Professor
Department of Mechanical Engineering
Indian Institute of Science
Bangalore 560 012, India.
Ph: +91 80 309 2301; Fax: +91 80 004 1648
satish@mecheng.iisc.ernet.in
http://obelix.mecheng.iisc.ernet.in/~satish/

Tribology,  Metal Forming, Contact Mechanics

D.Kalyanaraman M.Sc, M.Tech.
Faculty in an Engineering College
India

dkalraman@yahoo.com

Professor Bankim Chandra Majumdar
Professor of Mechanical Engineering
Indian Institute of Technology
Kharagpur 721 302, India
Ph: 91 3222 55221-223 Extn 2940; Fax:   91 3222 55303
majum@mech.iitkgp.ernet.in

Dr. Braham Prakash (presently in Japan as a JSPS fellow)
Industrial Tribology Machine Dynamics &Maintenance Engineering Centre
Indian Institute of Technology Delhi
New Delhi 110 016 INDIA
Ph: 91-11-685 7658, 91-11-686 1977; Fax: 91-11-686 2037, 91-11-685 5227
prakash@cc.it-chiba.ac.jp

Tribology of materials, high temperature tribology, tribotesting, component performance evaluation and diagnosis of industrial wear problems

Professor Dr. J. Prakash
Department of Mathematics
Indian Institute of Technology
Powai, Mumbai 400 076, INDIA.
Fax +91-22 578 3480
jp@math.iitb.ernet.in

Hydrodynamic and Elastohydrodynamic Lubrication; Porous Bearings, Surface Roughness

Dr. Ranjan Sen, B.Prod.E.,M.Prod.E.,Ph.D.
Scientist EI
Tribology Section
Central Mechanical Engineering Research Institute
Durgapur-713209, India.
sen_ranjan@hotmail.com

Solid Lubricants,Rolling Bearings,Surface Engineering.

Dr.B.Venkataraman
Head, Surface Engineering Group
Defence Metallurgical Research Laboratory
Kanchanbagh P.O.
Hyderabad-500 058, India
Ph: +91-40-4440051extn.6476; Fax: +91-40-4441439/4440683
bvenkat@dmrl.ernet.in   or  Bvraman@eth.net

Tribology of metallic materials, composites and coatings. Ballistic penetration and high strain rate flow behaviour of materials.



Israel

Professor Izhak Etsion
Head Shamban Tribology Lab.
Dept. of Mechanical Engineering
Technion, Haifa 32000, Israel
Ph:  972 4 829 2096;  Fax:   972 4 832 4533
merei01@tx.technion.ac.il
http://meeng.technion.ac.il/

Contact Adhesion and Friction modeling, Surface engineering, Hydrodynamic and Hydrostatic Lubrication.

Professor Isaac Garbar
Department of Mechanical Engineering
Ben-Gurion University of the Negev, P.O.B. 653,
Beer-Sheva, 84105, Israel
Ph:  972-7-6477070; Fax: 972-7-6472813.
garbar@menix.bgu.ac.il

Structure of material surface layers under friction; nature of wear; tribodiagnostics.

Dr. Yuval Golan
Department of Materials Engineering
Ben Gurion University
Beer Sheva, Israel
ygolan@bgumail.bgu.ac.il

Molecular scale tribology surface forces friction-induced material transfer/deposition

Dr. Reuven Porat  DS.c: MS.c : BS.c  Mechanical Engineer.
Chairman of the Israel Society for Tribology
Dipartment of R & D Iscar Ltd.
POB .11 Tefen 24959  Israel
Ph: + 972 4 9970405;  Fax: + 972 4 9970125
reuven@iscar.co.il

Diamond , Adhesive Wear & Friction Coefficient of Single Crystals , Diamond Coatings , Hard Coatings ,CVD Processes & Technology , Cemented Carbide , Advance Ceramic , Cutting Tool , Machining, Grinding , Nanocrystalline Materials .

Dr. Lev Rapoport
Head Tribology Lab.,
Department of Science, Institute of Science, Technology and Art
P.O.B. 305, Holon 58102, Israel
Ph: 972-3-5026616; Fax: 972-3-5026619
rapoport@barley.cteh.ac.il

Friction and wear of ceramics and coatings; solid lubrication; wear modeling.



Italy

Mr. Giuseppe Tripaldi
Via Maritano Spa, 26 San Donato Milano,  20097 Italy
Enitecnologie Spa
Ph: 39-2-52056133; Fax: 39-2-52056364
gtripaldi@enitecnologie.eni.it



Japan

Dr. Koshi ADACHI
Tribology Laboratory, Mechatronics and Precision Engineering
Tohoku University, Japan
koshi@tribo.mech.tohoku.ac.jp
http://130.34.93.226/index/
Incomplete information: Any help?Areas of reaserch / interest/expertise......

Dr. Rong CHEN
Material, Processing and Tribology Laboratory
IWATE UNIVERSITY
Ueda 4-3-5, Morioka-shi, Iwate 020-8551
Ph: +81-19-621-6417; Fax: +81-19-621-6417
chenrong@iwate-u.ac.jp
http://160.29.80.129/

Tribology at Cryogenic Temperature, Fretting Wear, Corrosive Wear and Combined Electropolishing, Maintenance Tribology

Dr. Unchung Cho
Laboratory of Tribology
Department of Mechatronics and Precision Engineering
Tohoku University, Sendai, 980-8579, Japan
Ph: +81-22-217-6957; Fax: +81-22-217-6955
cho@tribo.mech.tohoku.ac.jp

Solid lubrication, bio-tribology, mechanical systems diagnostics, wear debris analysis

Dr. Kuniaki Dohda
Dept of Mech Systems Engr
Gifu University
1-1 Yanagido, Gifu, Japan
Ph. & Fax: +81-58-293-2519
dohda@mech.gifu-u.ac.jp
Incomplete information: Any help?Areas of reaserch / interest/expertise......

Dr. Masao Eguchi
Laboratories for Analysis of Machine Components, Tokyo University of Agriculture and Technology
24-16 Naka-cho 2-chome, Koganei-shi, Tokyo 184-8588
Ph:  +81-42-388-7084, +81-42-388-7085; Fax: +81-42-385-7204, +81-42-388-7418
http://www.tuat.ac.jp/

Tribology of friction materials for oil immersed clutches, Boundary friction/lubrication, Tribology of new materials including liquid crystals, Rolling contact fatigue and micro-slip in concentrated contact

Dr. Shoji Haizuka
Haizuka Laboratory, The University of Electro-Communications
Dep. of Mechanical Engineering and Intelligent Systems
1-5-1,Chofugaoka,Chofu-shi,Tokyo,182-8585,Japan

Tooth surface strength, scuffing and efficiency of various kind of gears

Dr. Tetsuzo HATAZAWA
Machine Elements Laboratory, Faculty of Engineering, Utsunomiya University
Yoto 7-1-2, Utsunomiya-shi, Tochigi 321-8585
Ph:  +81-28-689-6058; Fax:  +81-28-689-6058
hata@mech.utsunomiya-u.ac.jp

Micro-Displacement Characteristics under Tangential Force between surfaces in Contact; Multiscale Topography and Contact Surfaces; Analysis of Friction and Wear Mechanism; Measurement of Surface Temperature by Infrared Technique; Friction Characteristics in Rolling-Sliding Contact

Dr. Hirotsugu Hayashi
Hirotsugu Hayashi Laboratory, Dept. of Mechanical Engineering, Waseda University
4-1, 3-chome, Okubo, Shinjuku-ku, Tokyo 169-8555
Ph: +81-3-5286-3260; Fax: +81-3-3209-0072

Numerical Analysis for Fluid Film Lubrication Theory, Fluid Film Lubrication by Non-Newtonian Lubricants, Engine Tribology,  Sliding Bearings, Sound and Vibration of Guitars

Professor Seiichiro Hironaka
Hironaka Laboratory, Tokyo Institute of Technology
Ookayama 2-12-1, Meguro-ku, Tokyo 152-8552
Ph:  +81-3-5734-2466; Fax:  +81-3-5734-2877
shironak@ceram.titech.ac.jp

Dr. Kazuo Hokkirigawa
Hokkirigawa's Laboratory, Yamagata University
Johnan 4-3-16, Yonezawa-shi, Yamagata 992-8510
Ph: +81-238-26-3250
tj322@dipfr.dip.yz.yamagata-u.ac.jp

Dr. Koji Ikeda
Laboratories for Analysis of Machine Components, Tokyo University of Agriculture and Technology
24-16 Naka-cho 2-chome, Koganei-shi, Tokyo 184-8588
Ph:  +81-42-388-7084, +81-42-388-7085; Fax: +81-42-385-7204, +81-42-388-7418
http://www.tuat.ac.jp/

Tribology of friction materials for oil immersed clutches, Boundary friction/lubrication, Tribology of new materials including liquid crystals, Rolling contact fatigue and micro-slip in concentrated contact

Dr. Hironobu Ito
Laboratories for Analysis of Machine Components, Tokyo University of Agriculture and Technology
24-16 Naka-cho 2-chome, Koganei-shi, Tokyo 184-8588
Ph:  +81-42-388-7084, +81-42-388-7085; Fax: +81-42-385-7204, +81-42-388-7418
http://www.tuat.ac.jp/

Tribology of friction materials for oil immersed clutches, Boundary friction/lubrication, Tribology of new materials including liquid crystals, Rolling contact fatigue and micro-slip in concentrated contact

Dr. Akira IWABUCHI
Material, Processing and Tribology Laboratory
IWATE UNIVERSITY
Ueda 4-3-5, Morioka-shi, Iwate 020-8551
Ph: +81-19-621-6417; Fax: +81-19-621-6417
iwabuchi@iwate-u.ac.jp
http://160.29.80.129/

Tribology at Cryogenic Temperature, Fretting Wear, Corrosive Wear and Combined Electropolishing, Maintenance Tribology

Dr. Katsumi Iwamoto
Mechanical Engineering Division, Tokyo University of Mercantile Marine
Etchujima 2-1-6, Koto-ku, Tokyo 135-8533
iwamoto@ipc.tosho-u.ac.jp

Dr. Tomoaki IWAI
Reseach Assistant
Tribology Laboratory
Faculty of Engineering, Kanazawa University
http://web.kanazawa-u.ac.jp/~tribo/TOMO.html

Tribology of polymeric materials and rubber

Dr. Jujiro KAGAMI
Machine Elements Laboratory, Faculty of Engineering, Utsunomiya University
Yoto 7-1-2, Utsunomiya-shi, Tochigi 321-8585
Ph: +81-28-689-6053; Fax: +81-28-689-6053
kagami@mech.utsunomiya-u.ac.jp

Micro-Displacement Characteristics under Tangential Force between surfaces in Contact; Multiscale Topography and Contact Surfaces; Analysis of Friction and Wear Mechanism; Measurement of Surface Temperature by Infrared Technique; Friction Characteristics in Rolling-Sliding Contact

Dr. Takahisa KAWAGUCHI
Machine Elements Laboratory, Faculty of Engineering, Utsunomiya University
Yoto 7-1-2, Utsunomiya-shi, Tochigi 321-8585
Ph:  +81-28-689-6061; Fax:  +81-28-689-6061
kawa@mech.utsunomiya-u.ac.jp

Micro-Displacement Characteristics under Tangential Force between surfaces in Contact; Multiscale Topography and Contact Surfaces; Analysis of Friction and Wear Mechanism; Measurement of Surface Temperature by Infrared Technique; Friction Characteristics in Rolling-Sliding Contact

Professor Koji Kato
Tohoku University, Laboratory of Tribology, Department of mechatronics and precision engineering
School of Mechanical Engineering,
Sendai 980, Japan
Ph:  +81-22-217-6954; Fax: +81-22-217-6955
koji@tribo.mech.tohoku.ac.jp
http://www.tribo.mech.tohoku.ac.jp/index2.html

Prof. Shigeaki KURODA
Fluid Dynamics Laboratory,  University of Electro-Communications
1-5-1 Cyofugaoka, Cyofu, Tokyo, 185-8585
Ph: +81- 424-43-5389; fax: +81-425-85-9318
http://www.kuroda.mce.uec.ac.jp

EHL, High speed lubrication, Lubrication with Emulsion.

Dr. Keiji Kyogoku
Nakahara and Kyogoku Laboratory, Tokyo Institute of Technology
Ookayama 2-12-1, Meguro-ku, Tokyo 152-8552
kyogokuk@mep.titech.ac.jp
http://www.mep.titech.ac.jp/Nakahara/

Dr. M Fujiwara and T Kazama
Mechanical Systems Design Laboratory
Muroran Institute of Technology
Mizumoto-cho 27-1, Muroran, Hokkaido
kazama@bear.mech.muroran-it.ac.jp
http://bear.mech.muroran-it.ac.jp/~kazama/index.html

Fluid Power Tribology, Hydraulic Pumps and Motors, Compressors

Professor Masabumi MASUKO, Dr. Eng.
Department of Chemical Engineering
Graduate School of Science and Engineering
Tokyo Institute of Technology
12-1 O-okayama 2-chome, Meguro-ku, Tokyo 152-8552, Japan
Ph: +81-3-5734-3036; Fax: +81-3-5734-2628
mmasuko@chemeng.titech.ac.jp
http://www.chemeng.titech.ac.jp/~mmasuko/mmhome_e.html

Antiwear Additive Performance under Rolling with Sliding; Partial EHD Conditions; Space tribology; Elastohydrodynamic lubrication and rheology of lubricating oils under high pressure; Tribo-Degradation of Lubricating Oils; Studies on synthetic lubricants; Effect of lubricating oils on wear of silicon nitride.

Professor Akira Miyamoto
Miyamoto Laboratory
Department of Materials Chemistry, Graduate School of Engineering,
Tohoku University, Aoba-yama 07, Sendai 980-8579
Ph:  +81-22-217-7233; Fax:  +81-22-217-7235
miyamoto@aki.che.tohoku.ac.jp
http://www.aki.che.tohoku.ac.jp/

Computational Study on Tribology and Materials Design

Dr. Yasunaga Mitsuya
Nagoya University, Japan
mitsuya@mitsuya.nuem.nagoya-u.ac.jp
Incomplete information: Any help?Phone:..; Fax:...Areas of reaserch / interest/expertise......

Professor Masabumi Masuko
Masuko Laboratory, Tokyo Institute of Technology
12-1 O-okayama 2-chome, Meguro-ku, Tokyo 152-8552
 Ph:  +81-3-5734-3036: Fax: +81-3-5734-2628
mmasuko@chemeng.titech.ac.jp
http://www.chemeng.titech.ac.jp/~mmasuko/

Dr. Koji MATSUMOTO
Space Tribology Research Group, Space Project and Research Center, National Aerospace Laboratory
7-44-1 Jindaiji-higashi-machi, Chofu, Tokyo, 182-8522
Ph: +81-422-40-3181; Fax: +81-422-40-3148
kmatsu@nal.go.jp

Tribology in high temperature vacuum, Effect of Low earth orbit space environment on solid lubricants

Dr. Satoshi Momozono
Nakahara and Kyogoku Laboratory, Tokyo Institute of Technology
Ookayama 2-12-1, Meguro-ku, Tokyo 152-8552
momozono@mep.titech.ac.jp
http://www.mep.titech.ac.jp/Nakahara/

Dr. Tsunamitsu Nakahara
Nakahara and Kyogoku Laboratory, Tokyo Institute of Technology
Ookayama 2-12-1, Meguro-ku, Tokyo 152-8552
nakahara@mep.titech.ac.jp
http://www.mep.titech.ac.jp/Nakahara/

Professor Makoto Nishimura
Tribology Laboratory, College of Engineering, Hosei University, Department of Mechanical Engineering, College of Engineering, Hosei University
Kajinocho 3-7-2,Koganei-shi, Tokyo, 184-8584
Ph: +81-42-387-6136; Fax: +81-42-387-6121
nisimura@k.hosei.ac.jp
http://www.trib.me.hosei.ac.jp/

Tribological Characteristics of MoSx Films Improved by High EnergyIon Implantation, Influence of Temperature on Tribological Characteristecs of Films Transferred in a Vacuum From Self-Lublicating Composites, Wear Mechanisms of Solid Lubricant Films Using Rolling Bearing Simulator,  Characteristics of Solid Lubricant Films Evaluated in Rolling/Sliding Contact in a Vacuum,  Improvement of Tribological Characteristics of Sputtered MoS2 Films in Humid Air, Tribological characteristic changes of solid lubricant films induced by, rockets launch vibration

Professor Akio Nitanai
Tribology Laboratory, Faculty of Tamagawa Univ.
6-1-1 Tamagawagakuen ?Machida-shi ?Tokyo 194-8610
Ph: +81-42-739-8361; Fax: +81-42-739-8361
nitanai@eng.tamagawa.ac.jp
http://www.tamagawa.ac.jp/GAKUBU/KOUGAKU/MechEng/tribo/tribo.htm

Rolling contct fatigue, Solid Lubrication, Materials for Sliding Parts,  Seals

Dr. Isami NITTA
Associate Professor
Graduate School of Science and Technology,
 Niigata University, Ikarashi 2-nocho 8050, Niigata, 950-2181,Japan
Ph & Fax: +81 25 262 7271
nitta@eng.niigata-u.ac.jp
http://tmtribo1.eng.niigata-u.ac.jp

Contact of the two solid surfaces. The analysis of the surface profile and the contact stiffness. thin polymer film method to measure real contact area and applied to the analysis of a variety of tribological problems

Dr. Yilmaz OZMEN  Ph.D.
Tsukuba, Mechanical Eng. Lab., Tribology Div.
Namiki 1-2, Tsukuba, 305-8564, JAPAN
Fax: +81 298 58 7007
yozmen@hotmail.com

Effect of Boriding on wear, Effect of residual stress on wear, DLC

Dr. Masayuki Shima
Mechanical Engineering Division, Tokyo University of Mercantile Marine
Etchujima 2-1-6, Koto-ku, Tokyo 135-8533
mshima@ipc.tosho-u.ac.jp
iwamoto@ipc.tosho-u.ac.jp

Dr. Tomoharu SHIMIZU
Material, Processing and Tribology Laboratory
IWATE UNIVERSITY
Ueda 4-3-5, Morioka-shi, Iwate 020-8551
Ph: +81-19-621-6417; Fax: +81-19-621-6417
tshimizu@iwate-u.ac.jp
http://160.29.80.129/

Tribology at Cryogenic Temperature, Fretting Wear, Corrosive Wear and Combined Electropolishing, Maintenance Tribology

Dr. Joichi  SUGIMURA
Assistant Professor
Dept. of Energy and Mechanical Engineering
Faculty of Engineering, Kyushu University
http://www.mech.kyushu-u.ac.jp/staff-e.html#kiene

Dr. Akihito Suzuki
Masuko Laboratory, Tokyo Institute of Technology
12-1 O-okayama 2-chome, Meguro-ku, Tokyo 152-8552
 Ph:  +81-3-5734-3036: Fax: +81-3-5734-2628
asuzuki@chemeng.titech.ac.jp
http://www.chemeng.titech.ac.jp/~mmasuko/

Dr. Kenji SUZUKI
Security Design Laboratory, Department of Engineering Synthesis, School of Engineering,
The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo 113-8656, Japan
Fax: + 81-3-3818-0835
info@sdl.t.u-tokyo.ac.jp
http://baron.t.u-tokyo.ac.jp/

Tribology of Journal Bearings; ETHL design of tilting pad journal bearing; Optimal design tool for journal bearing; Design of very high speed journal bearing with axial oil film rupture; Noncontact automatic measurement system of bearing surface profile; Tribology of Micromachines; Analysis of tribological phenomena under ultra-low load conditions; Tribological design of micromachine elements

Dr. Mineo SUZUKI
Space Tribology Research Group, Space Project and Research Center, National Aerospace Laboratory
7-44-1 Jindaiji-higashi-machi, Chofu, Tokyo, 182-8522
suzukim@nal.go.jp
Ph:  +81-422-40-3180;  Fax: +81-422-40-3148

Tribology in high temperature vacuum, Effect of Low earth orbit space environment on solid lubricants

Dr. Masato TANAKA
Security Design Laboratory, Department of Engineering Synthesis, School of Engineering,
The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo 113-8656, Japan
Fax: + 81-3-3818-0835
info@sdl.t.u-tokyo.ac.jp
http://baron.t.u-tokyo.ac.jp/

Tribology of Journal Bearings; ETHL design of tilting pad journal bearing; Optimal design tool for journal bearing; Design of very high speed journal bearing with axial oil film rupture; Noncontact automatic measurement system of bearing surface profile; Tribology of Micromachines; Analysis of tribological phenomena under ultra-low load conditions; Tribological design of micromachine elements

Dr. Shinji Tanaka
Nakahara and Kyogoku Laboratory, Tokyo Institute of Technology
Ookayama 2-12-1, Meguro-ku, Tokyo 152-8552
tanakas@mep.titech.ac.jp
http://www.mep.titech.ac.jp/Nakahara/

Dr. Jun Tomioka
 Jun Tomioka Laboratory, Department of Mechanical Engineering, Waseda University
3-4-1 Okubo, Shinjuku-ku, Tokyo 169-8555
Ph: +81-3-5286-3268; Fax: +81-3-3208-6471
tomioka@mn.waseda.ac.jp

 Fluid Film Lubrication by Viscoelastic Lubricants, Seals for Rotary Blood Pumps, Hemorheology,  Biomechanics of Blood Vessels

Professor Takashi Yamamoto
Laboratories for Analysis of Machine Components, Tokyo University of Agriculture and Technology
24-16 Naka-cho 2-chome, Koganei-shi, Tokyo 184-8588
Ph:  +81-42-388-7084, +81-42-388-7085; Fax: +81-42-385-7204, +81-42-388-7418
http://www.tuat.ac.jp/

Tribology of friction materials for oil immersed clutches, Boundary friction/lubrication, Tribology of new materials including liquid crystals, Rolling contact fatigue and micro-slip in concentrated contact

Dr. Shigeka Yoshimoto
Yoshimoto Laboratory, Science University of Tokyo
Kagurazaka 1-3, Shinjuku-ku, Tokyo, 162-8601
Ph:  +81-3-3260-4271; Fax: +81-3-3260-4291
yosimoto@me.kagu.sut.ac.jp
http://www.me.kagu.sut.ac.jp/~yosimoto/index-j.html

Professor Yoshitaka UCHIYAMA
Tribology Laboratory
Faculty of Engineering, Kanazawa University
uchiyama@kenroku.ipc.kanazawa-u.jp.ac
http://web.kanazawa-u.ac.jp/~tribo/labo5e.html

Tribology of polymeric materials and rubber; especially friction, wear and lubrication

Dr. Noritsugu UMEHARA
Tribology Laboratory, Mechatronics and Precision Engineering
Tohoku University, Japan
http://130.34.93.226/index/
Incomplete information: Any help?Areas of reaserch / interest/expertise......; E-mail:...; Phone:....; Fax:....

Dr. Dong F. Wang
Laboratory of Tribology
School of Mechanical Engineering
Tohoku University, Sendai 980-8579, Japan
Ph: 022-217-6957; Fax:  022-217-6955
dongfang@tribo.mech.tohoku.ac.jp
Incomplete information: Any help?Areas of reaserch / interest/expertise......

Professor Yuji YAMAMOTO
Dept. of Energy and Mechanical Engineering
Faculty of Engineering, Kyushu University
http://www.mech.kyushu-u.ac.jp/staff-e.html#kiene
Incomplete information: Any help?Areas of reaserch / interest/expertise......E-mail:...; Phone:....; Fax:....

Professor Tsuneo Yoshikawa
Department of Mechanical Emgineering,
Faculty of Engineering, Kyoto University
yoshi@mech.kyoto-u.ac.jp
http://poseidon.mech.kyoto-u.ac.jp/research/lubri/

Analysis of Gas Lubricated Piston Ring

Dr. YasuhiroYOSHINO
Material, Processing and Tribology Laboratory
IWATE UNIVERSITY
Ueda 4-3-5, Morioka-shi, Iwate 020-8551
Ph: +81-19-621-6417; Fax: +81-19-621-6417
tyoshino@iwate-u.ac.jp
http://160.29.80.129/

Tribology at Cryogenic Temperature, Fretting Wear, Corrosive Wear and Combined Electropolishing, Maintenance Tribology

Dr. Lin Zhou
Laboratory of Tribology
School of Mechanical Engineering
Tohoku University, Sendai 980-8579, Japan
Ph: 022-217-6957; Fax:  022-217-6955
zhou@tribo.mech.tohoku.ac.jp

_______________________________________________________________
Kuwait

Dr. Abdallah Elsharkawy, BSc(Eng), MSc(Eng), PhD
Associate Professor , Department of Mechanical Engineering
College of Engineering and Petrolum
Kuwait University, P. O. Box 5969, Safat 13060, KUWAIT
Ph: +965-481-1188 ext 5798; FAX: +965-484-7131
abdallah@kuc01.kuniv.edu.kw
http://www.eng.kuniv.edu.kw/mech/staff/sharkawi.html


Fluid film lubrication, contact mechanics.



Malaysia

Dr. Mohd Abdul Maleque 
Lecturer,Department of Mechanical & Materials Engineering 
University of Malaya 
50603 Kuala Lumpur, MALAYSIA. 
Ph:++(603)7567-5263; Fax: ++(603)7567-5317 
maleque@fk.um.edu.my / tasnim20@hotmail.com


Tribological Properties of Palm Oil Methyl Ester Additive in Mineral  Oils, Wear & friction of new materials, Corrosive wear, Development of  composite bearing materials for tribological applications.s Methodology.

Netherlands (Holland)

Dr.ir. Anton van Beek
Laboratory for Machine elements and Tribology
Delft University of Technology, Mech. Eng. and Marine Tech.
Tribology Dept., Mekelweg 2, 2628 CD DELFT, The Netherlands
Ph: +31 15 278 6984: Fax. +31 15 278 7980
A.vanBeek@WbMT.TUDelft.NL
http://www-tm.wbmt.tudelft.nl/tr/index.html

Ing. A.J. Hoevenaar, Bram
Laboratory for Machine elements and Tribology
Delft University of Technology, Mech. Eng. and Marine Tech.
Tribology Dept., Mekelweg 2, 2628 CD DELFT, The Netherlands
Ph: +015 2781663; Fax. +015 2787980
A.J.Hoevenaar@WbMT.TUDelft.NL
http://www-tm.wbmt.tudelft.nl/tr/index.html

Dr. Steve Franklin 
Manager, Tribology & Lifetime Performance Group, 
Philips Electronics, Centre for Industrial Technology (CFT) 
PO Box 218 / Building SAQ-2 5600 MD Eindhoven 
The Netherlands 
Ph.: +31 40 27 33022, Fax.: +31 40 27 33201 

s.e.franklin@philips.com
 

Tribology in professional equipment and consumer product applications.

Dr. ir. Rudi ter Haar
Corus Research, Development and Technology
Automotive Applications, Plasticity and Tribology Knowledge Group
Product Application Centre, Adress code 3H36
P.O.Box 10000, 1970 CA IJmuiden
Ph:  +31 (0)251 494078; Fax:  +31 (0)251 470432
rudi.ter-haar@corusgroup.com

Plasticity and Tribology.

ir. Wijtze ten Napel
University of Twente,  Faculty of Mechanical Engineering
Tribology group, Drienerloolaan 5, P.O. Box 217 , 7500 AE Enschede, The Netherlands
Ph: +053 4892466
w.e.tennapel@wb.utwente.nl
http://www.wb.utwente.nl/vakgroep/tr/tribeng.htm

(Elasto)Hydrodynamic lubrication & computational tribology

Ir. Ron A.J. van Ostayen
Laboratory for Machine elements and Tribology
Delft University of Technology, Mech. Eng. and Marine Tech.
Tribology Dept., Mekelweg 2, 2628 CD DELFT, The Netherlands
Ph.: 015 278 1647;  Fax: 015 278 7980
R.A.J.vanOstayen@WbMT.TUDelft.NL
http://www-tm.wbmt.tudelft.nl/tr/index.html

dr. ir. Dik Schipper
University of Twente,  Faculty of Mechanical Engineering
Tribology group, Drienerloolaan 5, P.O. Box 217 , 7500 AE Enschede, The Netherlands
Ph: +053 4892469
d.j.schipper@wb.utwente.nl
http://www.wb.utwente.nl/vakgroep/tr/tribeng.htm

Friction and wear

dr. ir. Matthijn de Rooij
University of Twente,  Faculty of Mechanical Engineering
Tribology group, Drienerloolaan 5, P.O. Box 217 , 7500 AE Enschede, The Netherlands
Ph: +053 4891178
m.b.derooij@wb.utwente.nl
http://www.wb.utwente.nl/vakgroep/tr/tribeng.htm
friction and wear

dr. ir. Kees Venner
University of Twente,  Faculty of Mechanical Engineering
Tribology group, Drienerloolaan 5, P.O. Box 217 , 7500 AE Enschede, The Netherlands
Ph: +053 4892488
c.h.venner@wb.utwente.nl
http://www.wb.utwente.nl/vakgroep/tr/tribeng.htm
Home page in Israel   http://www.wisdom.weizmann.ac.il/~kees/
(Elasto)Hydrodynamic lubrication & computational tribology



PERU

Mr. Jorge Cuadros Blas  Mech.Eng. SAE, STLE, ASQ Member
Proffesor of Mechatronics in the National Engineering University of  Peru
Filtration Laboratory Manager, Industrial Brawns S.A. -Filtros LYS-
Av. Industrial 3124 Lima 28, Peru
Phone : (511) 533-3399 ; Fax: (511) 533-3303
jcuadros@ibsa.com.pe
http://filtroslys.com

Particle evaluation in ISO grades by laser based automatic counter in Fuels ,Lube and Hidraulics fluids. Emission Espectroscopy for used oil analysis . Testing of Air and Fuel filters for automotive applications using SAE Standards Testing of Filtration Media by gravimetric and particle counter method using ISO Fine, ISO Coarse, and MIRA I, II, III Standardized contaminants.



Portugal

Prof. J. Paulo Davim
Machining & Tribology Research Group
Department of Mechanical Engineering
University of Aveiro, Campus Santiago
3810-193 AVEIRO, PORTUGAL
Ph: +351 234 401566; Fax: +351 234 370953

pdavim@mec.ua.pt
http://www.mec.ua.pt/machining/index-Pr.htm

Prof. Andrade Ferreira, Luís    Mech. Eng., Ph.D.
Department of Mechanical Engineering and Industrial Management,
Faculty of Engineering, Universidade do Porto Rua dos Bragas
4050-123 Porto, Portugal
Ph: ++351 222051241; Fax: ++351 222059125
lferreir@fe.up.pt

Grease lubrication of EHD contacts; Surface failure analysis of EHD contacts; Relationship between maintenance management and tribology.


Romania

Professor Andrei SZUDER M.Sc., Ph.D., Ph.D.
Director
Center for Advanced Technologies in New Materials
Politehnica University of Bucharest
Spl. Independentei 313
77206 Bucharest Romania
Ph: 40.1.4112604; Fax: 40.104112687
szuder@tempus.labsmn.pub.ro
http://tempus.labsmn.pub.ro

Areas of interest/work: Tribology, Abrasion, Lapping and Polishing, Surface Engineering, Wear modelling, Machinability, Machining Processes.



Russia

Dr. Aleksei Olegovich Pozdnyakov  MS, Ph.D.
Institute for Mechanical Engineering Problems,
Laboratory of Physics and Chemistry of Materials
adress for correspondance:
198188, str. Novostroek, 20, apt.86, St.-Petersburg, Russia
 Ph: +7-812 247-93-23; Fax: +7-812 247-89-24
 ao.pozd@pop.ioffe.rssi.ru
 aleksei@ap3193.spb.edu

Current address:
Humbold Fellow at Institute of Composite Materials
Kaiserslautern, Germany
pozdnyakov@ivw.uni-kl.de

The study of mechanisms of structure formation and destruction (thermal and mechanical) of thin polymer  films (homopolymers, copolymers, cross-linked systems, blends, polymer/fullerene compositions)  with an emphasis on the structure/mechanical (particularly tribological) relationships. The characterization methods used in the study involve temperature programmed mass-spectrometry (TPMS), ESCA, TPMS/ESCA combination in a single experimental set with self-made vacuum mechanical manipulators and a number of complementary methods: AFM, SEM, WAXD, PL.

Serguey Yu. Tarassov,
Senior scientist,  ISPMS SB RAS,
tsy@ispms.tsc.ru
http://www.ispms.tsc.ru/lfup/

Study of structural degradation of materials as a function of friction conditions

 



Singapore

Dr. Thomas Liew
R&D Manager, Tribology group
Data Storage Institute, National Univ. of Singapore
Singapore
tomliew@dsi.nus.edu.sg
http://www.dsi.nus.edu.sg/tracks/tribo/

Tribology of storage devices, magnetic thin film, nano-technology, and surface science.

Dr. Seh Chun Lim
Assistant Professor
Dept. of Mechanical and Production Engineering, National Univ. of Singapore
Singapore
mpelimsc@nus.edu.sg
http://www.eng.nus.edu.sg/mpe/staff/mpelimsc.html

Wear of materials and wear mapping

Dr. Bo Liu
R&D Manager, HDI group
Da